Rebuilding Gas Monkey Garage Wrecked 1976 Chevy C10 Part 2

Share
HTML-code

Comments • 2 792

  • Jesse Madrid
    Jesse Madrid  5 hours back

    If you're going to watch the whole video skip all the way till the end until the video finishes and then hit replay to avoid the annoying four to six ads in between

    • Damo B
      Damo B  7 hours back

      Why didn't you pull truck before pulling it apart?

      • Brian Grogan
        Brian Grogan  10 hours back

        I thought Mike Coy painted the C10, but I've slept since then.

        • Cole Pegelow
          Cole Pegelow  10 hours back

          Try Rascal Flatts salvage of Salisbury Missouri 660 388 6389 they have a lot of salvage vehicles and frames that have already been stripped. I live in the area so will give them a hollar. Fair prices as well for around here at least. And by the way the frame you'll need is between the years of 73 to 80 because 81 through 87 the frames are different because of mounting locations. Idk if it's been mentioned but you'll need to keep ahold of the old frame for a while because it was notched and cut in the back end to accommodate the brackets to get that truck that low so you will have to do the same for the new frame as well. Best of luck to you my friend. Had the same thing happen to my 84 when I graduated high school. Currently in the process of buying another 81 through 86 to build into a pro touring truck. Wish I never sold my 84 but times were tough and needed the money to get another vehicle. You should be able to see my 84 I had in my profile picture here on the tube.

          • Stanley

            Thanks for posting, that's one big project you took on. How many man hours do you think it will take?

            • Chris Flint
              Chris Flint  13 hours back

              Go to rockauto.com

              • Roger Wheatley
                Roger Wheatley  13 hours back

                Lmc does both oem and aftermarket but either way the panels fit good as far as the frame goes you could always do a custom frame because your going have to cut up the factory frame anyway for the airbags and body drop that were on it

                • lastminute5575
                  lastminute5575  14 hours back

                  Shoot I have a frame already body dropped. Body is straight too. Cheap

                  • D C
                    D C  15 hours back

                    Rebuilding a custom vehicle with one-off parts throughout seems like a terrible idea unless you are going to re-make those one-off parts...Good luck.

                    • monster novideo
                      monster novideo  15 hours back

                      there's always lmc.com

                      • Stanley Banks
                        Stanley Banks  15 hours back

                        That wheel is easily repairable
                        Check for well repair I've seen them taco ed cracked in half and repaired. Check the web. 200$ is alot cheaper than the 5k you will pay for machine time and billet.

                        • Physifist Engineering
                          Physifist Engineering  16 hours back

                          It's a Ron Davis radiator you fucking idiot. Why do you even have this channel? You shouldn't be touching custom cars because you dont know what the fuck you're doing.

                          • Al Bore
                            Al Bore  17 hours back

                            How much of this truck do you plan to re use ? 25% ?

                            • kevin claridge
                              kevin claridge  18 hours back

                              wow this will test you to the max good luck

                              • Christopher Kirkland
                                Christopher Kirkland  1 days back

                                Check with them and make sure you check on any mods that may have been done to that frame so you don’t have any issues on the frame swap

                                • TERRY WATKINS
                                  TERRY WATKINS  1 days back

                                  Hey Alex johnthen w on you tube has a C10 frame and fenders I figure I would let you if you still need them.

                                  • Tegan Lesjak
                                    Tegan Lesjak  1 days back

                                    I can’t believe he sawzalled that slosh tub.......

                                    • Whiskey Tango
                                      Whiskey Tango  1 days back

                                      What's with the robot speaking?

                                      • Vincent James
                                        Vincent James  1 days back

                                        https://www.barrett-jackson.com/Events/Event/Details/1976-CHEVROLET-C-10-CUSTOM-PICKUP-182061

                                        • tbirdracefan
                                          tbirdracefan  2 days back

                                          Don't play the drinking game for every time he says "AND". Much to dangerous.

                                          • Byronoo Torres
                                            Byronoo Torres  2 days back

                                            Vtune could fix that’s lol 😂

                                            • J Garza
                                              J Garza  2 days back

                                              Those lug nut you can remove them with a regular socket

                                              • YeastyGeorge
                                                YeastyGeorge  2 days back

                                                wanna come over and jerk off with me? Nothing gay. Just two guys jerking off while they stare at each other. NO GAY STUFF! If things feel right we can tug each other’s meat for a few minutes. Let’s play it by ear though. See you soon bro!

                                                • David Giasson
                                                  David Giasson  2 days back

                                                  WAAAYYYYYYYY TOO MANY COMMERCIALS!

                                                  • Abe Jwad
                                                    Abe Jwad  2 days back

                                                    Richard Rawlings, just blew a gasket. He wants to buy it back just to crush it.

                                                    • Your Name
                                                      Your Name  2 days back

                                                      To bad those rims and tires ruin the classic truck look and vibe.

                                                      • Craig McKinney
                                                        Craig McKinney  2 days back

                                                        Some of these comments are clearly made by jerks, who are no doubt sitting on the couch most of the time and dont have half the skill set this guy does lol we live in a world of negative naysayers and nit pickers, you are doing a pretty sweet thing with this truck man, I was wondering if anyone was going to do something with this truck.

                                                        • Brian Proffitt
                                                          Brian Proffitt  2 days back

                                                          I doubt that’s s factory frame

                                                          • Simone Jason Remondini

                                                            Fans are from SPAL company, you should find them on JEGS.com

                                                            • Brad Mclaughlin
                                                              Brad Mclaughlin  2 days back

                                                              Acme Chassis Factory is a good alternative to a roadster shop frame. I agree with the comments below a custom built chassis is a way better, especially when doing air ride. A stock c channel cut frame with that power plant is a no for me. Chris Coddington can fix your intro wheel at a reasonable price.

                                                              • James Scully
                                                                James Scully  2 days back

                                                                The 1973-1980 were the same. From 1981-1987, the front sheet metal was slightly changed so it won't match up.

                                                                • Mad Hatter
                                                                  Mad Hatter  2 days back

                                                                  They ordered a hood but it wasn't perfectly straight as many OE parts end up with imperfections but to use more then a skim coat of filler is a cheap cop out on whats supposed to be a very high end build.
                                                                  As thick as that filler is in areas it would have been a matter of time before it began cracking, I have to assume they felt it was going to be a trailer queen..... Sad they didn't do it right.
                                                                  Rebuild it your way but I'd rather have a high end driver that has a few imperfections.

                                                                  • Chopper1
                                                                    Chopper1  2 days back

                                                                    First thing I would do is take it to a body shop and have it measured. But it is messed up

                                                                    • Chopper1
                                                                      Chopper1  2 days back

                                                                      First thing I would do is take it to a body shop and have it measured. But it is messed up

                                                                      • Arty Rangel
                                                                        Arty Rangel  2 days back

                                                                        I believe that frame was custom made for the suspension it has to be able to run airbags the whole rear end has to be modified those trucks are popular here in Texas

                                                                        • Chris Crouch
                                                                          Chris Crouch  2 days back

                                                                          Dude go check a u pick it, I'm sure you can find a frame real easy.

                                                                          • Scooter George
                                                                            Scooter George  10 hours back

                                                                            Old school body shops used to straighten frames.

                                                                        • B Povish
                                                                          B Povish  2 days back

                                                                          I only watched some of this BECAUSE of the GMG truck. This is like watching a Toddler robot with extremely limited knowledge of the use of tools, or the 76 truck which is the same as almost all Chevy trucks for 50 years. lol Can't take fender off without hood, oh.........look he figured it out....... I woulda' pulled the entire front off as one piece. Everyone but this guy knows it comes off super easy that way in one piece once you unplug harness and unbolt it................. Frame is not flimsy it is MADE to crush. If the front of this vehicle did not crush all occupants would likely have died............... Sheesh for those of you that enjoy this???? Enjoy................ Me I'm gonna go watch VEHCOR. That is a channel with an expert! lmao

                                                                          • Mr Smith
                                                                            Mr Smith  2 days back

                                                                            Am I the only one getting annoyed with the amount of ads on these videos?!?! Come on YouTube I don't mind 1 but this videos had 5 while I'm watching.... Please stop 🛑

                                                                            • th33 Smackdown
                                                                              th33 Smackdown  2 days back

                                                                              Dude u talk to much! I'm gone

                                                                              • Ron Gosciniak
                                                                                Ron Gosciniak  2 days back

                                                                                For under 1000.bucks you can get and electric car pusher..... Im not sure why so many shops here on You Tube and TV dont have them. They are electric and can push up to 6000 lbs.

                                                                                • goog le
                                                                                  goog le  2 days back

                                                                                  buy American made tools!

                                                                                  • bowslap
                                                                                    bowslap  2 days back

                                                                                    It's a 1/2-ton truck, the frame is stout enough it's weight class. Modern truck frames are a bit overkill. 1973-1987 is the entire run of this bodystyle. The body panels changed in 1981, you'll need 1980-earlier. As far as a non-rusted donor frame, that's going to be a tough bill to fill. Good luck, and will watch along for the rebuild!

                                                                                    • Derek Chapel
                                                                                      Derek Chapel  2 days back

                                                                                      Next episode “ Chassis come home “.

                                                                                      • Robert Rangel
                                                                                        Robert Rangel  2 days back

                                                                                        Calm down buddy . I was born in 75 thats a 76, Im not 50 something yrs old like you described the hood. Made me feel very OLD. but good job your doing.

                                                                                        • Pizza Man36 the
                                                                                          Pizza Man36 the  2 days back

                                                                                          I subscribed

                                                                                          • max bogers
                                                                                            max bogers  2 days back

                                                                                            Lmc has OIM parts from storages and mostly aftermarket

                                                                                            • Kenny Johnson
                                                                                              Kenny Johnson  2 days back

                                                                                              Puts a rag between the door and fender to "not damage the fender" then proceeds to the fender to get it off. The fender is beyond damaged...

                                                                                              • Charles Maronay
                                                                                                Charles Maronay  2 days back

                                                                                                Oh and you didn’t pay a dime for that truck 😂